This tutorial will show you how to make an inexpensive gun case using hot glue, a common ingredient found in glue sticks.
You’ll need:To begin, open up your old cardboard box or box of old cardboard, put some hot glue inside and cut it into a wide shape.
Then, start to add cardboard and plastic to the box.
Add a few holes around the edges of the gun case to give the case a shape.
The best part about using hot glues is that they don’t burn, they dry quickly and don’t scratch.
You can do this by making a small hole and filling it with the glue.
You’ll need a disposable disposable mask for this method.
Fill the hole with hot glue and then use your fingers to press the glue into the cardboard.
You could also use a pair of scissors or your fingers.
If you have to, make sure you get the cardboard to the right thickness.
This step is optional.
The gun case will look like this:Now that you have a good size cardboard box, you can glue some more cardboard.
Put a piece of cardboard inside and put some more hot glue in the hole.
Next, put a piece more cardboard in the same hole.
Repeat this process for the remaining cardboard.
After a while, you’ll have a large cardboard box and you’re ready to paint the box!
You’ll also need a small piece of glue to make the gun cases paint-able.
You don’t need a whole bunch of glue.
Just enough to cover the cardboard and paint the sides.
To paint a box, start by filling the box with paint and spray it on the side of the box to give it a good gloss.
Then add some glue to the paint.
Paint it to the cardboard with hot glue.
Now add some more glue and paint it again.
It’s a long, slow process and you can paint a lot.
You can also paint the outside of the boxes with hot wax and glue.
It’ll take some time to get the glue on the cardboard, but once you get it to a good consistency, you won’t need to worry about it.
Finally, you could add a little paint to the sides of the cardboard for a more interesting look.
Just paint it lightly to make sure it looks nice.
You may want to add a few more coats of paint if you want to make it even more interesting.
When you’re done, you should have a neat looking box with a nice, solid feel.
You should also have some paint on the inside of the plastic parts of the case.